Categories
3D Printing Gadgets

CES 2015 MegaPost

One last CES 2015 post, collecting the video coverage I did in one place so that you can watch them all at once if you so please. I don’t recommend consumption of video in parallel, though…generally speaking, it’s best consumed serially.

Here’s all five of my CES2015 videos for your viewing pleasure:

CES2015 Preview

CES 2015 Unveiled

CES 2015 Press Day

CES 2015 3D Printers

CES 2015 Best & Worst Wrap Up

Thanks one last time to Springshare for sponsoring my CES2015 coverage. If your library needs a solution for desk scheduling, research guides, or room booking, check out their LibApp platform

Categories
Technology

CES 2015 – Best & Worst

Here’s my last video from CES2015, a wrap-up that’s full of the best and worst of the technology that I saw. Hopefully you’ve enjoyed my coverage, and I’ll get a chance to head back next year for another run at the largest technology show in the world.

If you want to catch up on all of my coverage, you can see everything I posted via this link.  And if you have any questions about technology and libraries, want to pick my brain about anything that I saw, or want to ask me about specific technology recommendations for your library, feel free to drop me a line.

CES 2015 coverage sponsored by Springshare. If your library needs a solution for desk scheduling, research guides, or room booking, check out their LibApp platform

Categories
Personal Technology

CES 2015 Wrap-Up is on the way

Just a quick note that I am producing a CES 2015 wrap up video that has a variety of things that I haven’t talked about or linked to yet, including some of my favorite overall pieces of tech that I had a chance to see and play with at the show. However, going through ALL of the video I took is taking me some time (at a quick glance, I took something like 3 gigabytes of video while I was in Las Vegas). Which means editing it together isn’t a quick affair.

It will be out this week. But later this week. Keep watching this space.

Categories
3D Printing Technology

CES 2015 – 3D printers

I spent the first day of the exhibit hall opening working to see all the 3D printers that I could, and that turned out to be basically an all-day affair. This year CES isolated all of the 3D printers together at the Sands convention center, which turned out to be great…they were all together, and it was easy to compare sizes and capabilities. Check the video for some visuals and commentary on the ones that I paid the most attention to, but here’s the basic rundown for libraries.

There is yet another questionable audio portion in this video where my evil microphone comes back into play. Please forgive me, and know that I will be burning said microphone on the alter of better audio quality as soon as I am able. 

My number one choice for libraries that are looking at buying a 3D printer is the Lulzbot Mini from Aleph Objects. Released officially here at CES2015, the Mini will be shipping this month for $1350, and comes preassembled and can be ready to print just minutes after taking it out of the box.

I have been continually impressed with the quality of work that Lulzbot is doing, and I personally have one of their larger Taz printers (the Taz 2) that I have been running for over a year now with almost zero problems. But most importantly for libraries, Lulzbot is a dedicated Open Hardware company, which means that you will never be locked into proprietary parts or software to run your printer. If you need to repair a part, everything is documented and can be sourced from non-Lulzbot sources if needed.

Perhaps obviously I am biased towards open hardware, but I think that it is keeping with the spirit of the Library to support open information in all its forms. My older recommendations for printers included Makerbot…until they started locking down their devices to the point where now they are having serious issues with their newest printers, and customers have no recourse.

I have two other recommendations for libraries that are looking at buying a 3D printer in the next year. The first I mentioned briefly on one of my earlier reports, Ultimaker and their new range of small, medium, and large printers. Also a champion of Open Hardware design, Ultimaker provides all of the files and schematics for their printers online for free. I don’t think any library would go wrong choosing one of these printers for their Maker Space.

Finally, the third in my recommendations for libraries looking for something more interesting, even at the entry level, for 3D printing is any of the products from SeeMeCNC and their line of Delta printers. A departure from the cartesian printers that nearly everyone else makes, Delta-style printers are really eye catching and would be a great addition to a library Maker Space. And with their newest mini-delta, the Eris, SeeMeCNC has hit a very attractive price point for libraries, only $599.

Lots more type of stereolithographic printers as well…these are the 3D printers that use resin-based printing rather than the typical melted plastic that you find in the printers mentioned above. Take a look at the video for shots of the Form1, the Old World Labs printers, and more.

By far the most interesting new type of printer that I got to see was the Voxel8, a printer that’s designed to print in both plastic and conductive ink simultaneously, enabling the 3D routing of conductive structures and circuitry inside the plastic being printed around it. Watch the video to see more about them.

CES 2015 coverage sponsored by Springshare. If your library needs a solution for desk scheduling, research guides, or room booking, check out their LibApp platform

Categories
3D Printing Gadgets

CES 2015 Press Day

The day before the actual conference exhibits and such open at CES is Press Day. Effectively, it’s a day full of large press conferences that require standing in line to hear the big announcements from all the major players at CES: Samsung, HTC, Panasonic, and such. The evening of Press Day, however, has one of the better press events that happens at the same time as CES every year, Pepcom’s Digital Experience. This report is a wrap up of what I saw at press day, which includes new 3D printers from Ultimaker (one of my favorite 3D printer manufacturers, along with Lulzbot and SeeMeCNC, both of whom I’ll report on as part of tomorrow’s coverage), a handful of drones, and an interesting robotics platform that I think could be useful for library programming with kids and young adults.

I apologize for the audio quality, especially during the first part of the video. I’m not sure exactly what happened other than my microphone really didn’t like some of the ambient sounds in the room. I promise, it gets better.

CES 2015 coverage sponsored by Springshare. If your library needs a solution for desk scheduling, research guides, or room booking, check out their LibApp platform

Categories
Gadgets Personal

CES Unveiled 2015

After a full day of travel, I attended the first press event for CES 2015, CES Unveiled. This is the event where the eager press gets its first shot at video and interviews with newest and shiniest tech of the year…and some of the silliest. The standout at this particular event seemed to be Belty, a (and I assure you, I am not making this up) automated smart belt. It was so popular that I couldn’t even get close.

It’s pretty easy to make fun of some of the products, whether that’s the bluetooth enabled propane tank sensor (even more frightening? There’s MORE THAN ONE OF THEM ON THE MARKET) or the $180 smart basketball.  On the other hand, there are some really interesting things as well, like the Ozobot robot platform that allows kids to learn programming thru interacting with it via the Blockly programming language. Even better, the company that makes them is working towards open sourcing the hardware to allow the enabling of even more interesting interactions.

All of those, and more cool stuff, in the video below. Thanks for watching!

CES 2015 coverage sponsored by Springshare. If your library needs a solution for desk scheduling, research guides, or room booking, check out their LibApp platform

Categories
Personal Technology

CES 2015 Preview Thoughts

Here’s a quick video with some of my thoughts about what I’m likely to be talking about over the next 3-4 days in my coverage of CES 2015. Watch here for videos over the next few days as I go through the largest technology show in the world!

Categories
Digital Culture Personal

CES 2015 Planning

For the 6th year in a row, I will be attending CES in Las Vegas during the first week of January. For the uninitiated, CES is the largest consumer electronics trade show in the world, and where the world comes together to see what’s on tap for technology for the upcoming year. They reported that 2014 was the largest attendance yet for CES, at 160, 498 attendees…this is like a mid-sized city worth of technology to look at over the course of about 4 days.

This year, they have finally seriously outgrown the Las Vegas Convention Center, and have spread all around town to include exhibits at the Venetian and Wynn conference centers as well. I’m still planning a method of attack, but I expect that I’m going to be spending a lot of time looking at 3D printing again (the technology is changing so fast, I want to see what the newest printers can do). I’m also betting that this year is a huge explosion of connected household/Internet of Things systems, so that will be interesting to see what’s likely to be important in that area. And, of course, I’m expecting to see smartwatches hanging on every booth.

My coverage this go round is likely to be mostly video based, and my goal is going to be to get a video out every day of the show with summaries of what I’ve seen and what I think is important. I’ll be posting those videos on my YouTube channel, here on Pattern Recognition, and they are also going to be showing up over on the ALA TechSource blog. Any writing that I manage to do will be here as well, and I’ll be tweeting from the show like crazy if you want the blow-by-blow sort of take on CES. If you want to follow what I’m writing here, you can just save this search.

The biggest change in my coverage this year is in my funding model. In the past, I have done a variety of things in order to try and cover my costs for attending CES. For my first and second visit, my employer funded the trip. For the third, I was funded partially by my work writing for American Libraries and the Perpetual Beta blog. In 2013, I tried yet another method, actually crowdfunding the coverage by asking for donations and providing a central repository for all the material (video, photos, tweets, etc). For the record, that attempt went very poorly.

So for CES2015, I decided to try yet another way of covering the costs of attendance…selling ads in my reports. I approached four library vendors and gave them an opportunity to buy a variety of different ads, ranging from logo-only visuals to the reading of an ad in one of my video packages. Two of those vendors came back with a very quick “no”…one because it wasn’t the sort of thing they do, and another because I don’t think they understood what I was doing. 🙂

A third vendor countered, and asked if they could simply be the only sponsor for the coverage, covering the costs of my attendance while I included some very small mentions of them in the videos that I will be producing from Las Vegas. That sounded like a fantastic idea to me, and so my CES2015 coverage is going to be sponsored by Springshare.

SpringyLogo600px

I will be mentioning Springshare and thanking them in the videos I produce, but it isn’t going to be like the Texaco Star Theater, I promise. Unless you really, really wanna see me sing and dance (protip: you do not).

I look forward to seeing what is coming in the next year in technology and reporting it out to all the librarians that I can. If you have questions, things you think I should pay special attention to, feedback from previous year’s coverage, or really anything else: please leave a comment or drop me an email. I’d love to hear from you.

Here are some blasts from CES past to whet your appetite:

CES 2010

CES 2012

CES 2013

CES 2014

Categories
3D Printing Personal Technology

CES 2014 and American Libraries

Once again I will be venturing forth in the first week of the new year in order to try and wrap my head around the largest consumer electronics convention in the world: CES 2104. Last year I tried a sort of crowd-funded coverage model, but this year I was approached by American Libraries to cover it for them! That means this year you’ll be getting my take on the newest tech over at the American Libraries Scoop blog, as well as here on Pattern Recognition. For anything that I think is of interest to libraries, I’ll be doing some video, photos, and write ups over on The Scoop, and then general tech stuff will be folded in here at PatRec. I’ll do some cross-linking so that people don’t miss anything, though. If you’d like to see the sort of coverage I’ve done in the past, you can take a look at the archives.

Here’s the bit where you can help! If you have any particular tech you’d like me to take a special look at, or company that you’d like some more info about…really, anything you’d like to know more about, let me know! You can leave a comment here on the post, or follow me on Twitter (@griffey) and let me know there. I’ll be tweeting pretty aggressively from CES, so it’ll be easy to follow along with what I’m seeing.

Let me know what you’d like to hear about, and I’ll do my best to find some information and share it.

Categories
Personal presentation Technology

My CES2013 Hangout

As a sort of wrap-up for my CES2013 coverage, I decided to advertise and present a live, interactive online webinar driven by Google Hangouts. That happened today, and this is the resultant video presentation. The first 57 minutes and 30 seconds or so is me talking through a slideshow on trends and the effect said trends may have on libraries, while the last half-hour is me taking questions from the chat room, twitter, and from the brave souls who took time out of their day to join me in the Hangout and ask questions.

As I said in my initial plan for attending and covering CES2013, “…for the very first time decided to experiment with crowdfunding something I’m doing and ask for donations. Or, to put it a different way, I’m becoming a busker for the trip.” This trip had no sponsors, and while I haven’t gotten the full stats on how many people watched the Hangout, watched my video reports, read my blog entries, or just laughed at some of my pictures, at this point many dozens-to-hundreds of people have seen my work. Of those, exactly 4 have decided that what I was doing was worth paying for.

This isn’t me complaining about that! This was and is an experiment, and if I don’t let people know the results, then it’s not really an experiment that others can learn from. I promised transparency, so here it is: I received 4 donations from 4 individuals: $10, $20, $20, and one incredibly kind soul for $50, bringing my grand total for donations to $95.30 after Paypal fees. I find this a fascinating response, given that it is routine for educational opportunities exactly of this sort (literally, I have given them) to cost many hundreds of dollars. This was free, available for anyone…and yet. And yet.

Lots to think about! But in the meantime, I’m going to continue to produce content and write and speak and read and think about technology and libraries. If you think what I’ve done here is worth paying for, I’m going to leave the donation option open for a bit longer, just to see if people finding this after the fact decide to chip in. I will, of course, continue to report on the experiment. Thanks to everyone who watched, commented, joined in, or hopefully learned something about the tech of CES2013.